Changing the Copy Settings
Press the Settings button in the copy mode to go the Copy settings screen.
You can specify the copy settings such as the page size, media type, or print quality.
Depending on the functions, some setting items cannot be specified in combination.
Print settings, except for magnification and automatic intensity adjustment settings, are retained even if the machine is turned off.
(1) Page size
Select the page size of the loaded paper.
8.5"x11" / 8.5x14 / A4 / B5 / A5 / 4"x6" / 5"x7" / CREDIT CARD SIZE
You cannot load paper other than A4, Letter, or B5-sized plain paper in the Front Tray. When specifying a page size other than A4, 8.5"x11"(215x279), or B5, load paper in the Rear Tray.
(2) Media type
Select the media type of the loaded paper.
PLAIN PAPER / PHOTO PAPER PRO / PHOTO PAPER PLUS / MATTE PHOTO PAPER / GLOSSY
Note: If non-Canon photo paper is being used, try setting the Media Type to the 'Photo Paper Plus' setting. Many third-party paper manufacturers provide instructions / settings to be used with Canon printers on their Web sites or packaged with the paper. For best results use genuine Canon photo papers.
You cannot load paper other than A4, Letter, or B5-sized plain paper in the Front Tray. When specifying a media type other than Plain paper, load paper in the Rear Tray.
(3) Print quality
Adjust print quality according to the original.
STANDARD / HIGH / FAST
If you used Fast with media type set to Plain paper and the quality is not as good as expected, select Standard or High and try copying again.
Select High to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white.
Specify the reduction/enlargement method. For details, see Reducing or Enlarging a Copy.
Zoom (25-400%) / Preset Ratio / Fit-To-Page / Same Magnification
Magnification settings are cleared when the machine is turned off.
You can specify whether to enable automatic intensity adjustment.
(5) Auto intensity
Specify whether the intensity is adjusted automatically.
On / Off
When Auto intensity ON is selected, Auto will be displayed above the intensity slide bar in the Copy standby screen.
You can change the intensity by pressing the or button even when Auto intensity ON is selected. To enable auto intensity again, move the cursor to the center of the slide bar.
Automatic intensity adjustment is set back to off when the machine is turned off.
Automatic intensity adjustment is not available when scanning originals from the ADF.
You can select from the following reduction/enlargement methods according to your purpose.
1. Press the Enlarge/Reduce button, and then press the or button to select the magnification setting item.
Alternatively, in the Copy settings screen, press the or button to select tab 1, and then press the or button.
2. Select the reduction/enlargement method.
Press the or button to select Fit-to-page.
When loading the original on the ADF, you cannot select Fit-to-page.
When you select Fit-to-page, the document size may not be detected correctly depending on the original. In this case, select Preset ratio, Zoom (25 - 400%), or Same magnification.
Press the or button to select Zoom (25 - 400%).
(A) 125 %
Press the OK button or the button, and then press the or button to specify the custom reduction or enlargement ratio.
To change the setting value faster, hold down the or button.
Press the or button to select Preset ratio.
Press the OK button or the button, and then press the or button to select a preset ratio.
When you want to copy at the same size as the original, select Same magnification.
3. Press the Settings button to finalize your selection.
The LCD returns to the Copy standby screen.